Product Description:
This device serves as an inertial angle rate sensor utilizing the optical Sagnac effect to measure the rotational angular velocity of the carrier along its sensitive axis. Employing a digital closed-loop detection circuit, it extracts the optical path difference caused by external physical angular speed in a clockwise direction. Through modulation and demodulation of the optical path signal voltage, closed-loop feedback and control are implemented, enabling real-time detection of angular velocity signals.
Function: This product consists of two parts: optical angular velocity sensitive unit and signal detection, providing uniaxial angle increment information and internal temperature information.
Application scope: The products are mainly suitable for photoelectric crane / crane / flying platform / inertial navigation / inertial measurement system / optical / photographic instrument / platform stabilization device / inertial measurement instrument and other applications.
Installation mode 1. Size: 50X50X32
Installation mode: 2nd dimension: 50X50X36
Technical Parameters:
| Sn# | test item | H | L |
| 1 | Dimensions (mm) | 50×50×36 | 50×50×36 |
| 2 | start time (s) | 5 | 5 |
| 3 | Bias drift (°) / h (10s smooth, fix temperature) | ≤0.1 | ≤0.3 |
| 4 | Bias drift (°) / h (10s smooth) -45~ + 70℃ | ≤0.3 | ≤0.5 |
| 5 | Bias repeatability (°) / h | ≤0.05 | ≤0.1 |
| 6 | Random walk coefficient(º)/h1/2 | ≤0.01 | ≤0.02 |
| 7 | Scale factor non-linearity (ppm) | ≤10 | ≤20 |
| 8 | Scale factor repeatability (ppm) | ≤10 | ≤20 |
| 9 | Operate temperature ℃ | -45～+70 | -45～+70 |
| 10 | Storage temperature (℃) | -50～+80 | -50～+80 |
| 11 | Dynamic range (°) / s | ±900 | ±900 |
| 12 | Supply voltage (V) | +5 | +5 |
| 13 | Steady-state power consumption (full temperature) (W) | <4 | <4 |
| 14 | weight (g) | ＜130 | ＜130 |
Support and Services:
Electronic Gyroscope Sensor Technical Support and Service
- Provide technical support for any product related questions
- Provide assistance with installation and setup of the product
- Provide troubleshooting support to resolve any technical issues
- Provide software updates and patches to ensure the product is up to date
- Provide assistance with warranty claims and repairs
- Provide advice and guidance on best practices for using the product
- Provide training and education on the product and its features
Packing and Shipping:
Packaging and Shipping of Electronic Gyroscope Sensor
All Electronic Gyroscope Sensors should be packaged and shipped in accordance with the following guidelines:
- The Gyroscope Sensors should be packed in a sturdy box with enough cushioning material to protect it from any shock or vibration.
- The box should be clearly labeled with the contents, destination, and sender information.
- The box should be sealed with a tamper-evident seal, to ensure that the product has not been tampered with.
- The box should be shipped via a reputable courier service, to ensure that it arrives in a timely manner and in good condition.
